Washing facade package incl. water brush and 8 meter telescopic handle with retracted hose.

A good cleaning package with efficient and gentle water brush and telescopic handle with retracted water hose and Gardena plug (male).

As an option, there is an angle adapter for extra hard-to-reach surfaces and angles. Choose with or without angle adapter when ordering here.

The screw attachment in the brush is already angled at about 45° degrees, which gives you a good working angle to the surface from the start when cleaning, see picture without v-adapter next door. The tip of the shaft is a threaded brass adapter that is screwed into the brass female of the brush (no plastic screws here...).

The brush is effective and gentle and can reach between e.g. the lid panels of the house. The brush weighs 370 grams. The telescopic handle weighs about 2.5 kg (about 2.5 liters of liquid).
The smoother the surface to clean with the brush, the better. Brushes wear more on e.g. sharp and rough plaster and thinly painted unpolished panels than painted aluminum or well-painted wood surfaces. Avoid surfaces painted with linseed oil paint or sensitive plaster.

You will be really impressed at how clean it gets with this tool. If you want to use an agent for hard surfaces, we recommend Tercol, which we sell. Apply the product and leave it on for at least 2-5 days without rain. A smart and easy way to get the product on the facade / roof is with our own solution "Package with Gloria pressure sprayer & special hose.". Here are several Gloria packages with our special hose in different price ranges. Then choose whether you want to rinse off the wall 2-5 days after treatment with the brush & water for fast and visible results, or let the weather rinse the surface over time..The longer the agent is allowed to work, the better.
Clean the brush from the agent afterwards.

If you want to sweep & scrape down moss on the roof, you can read more about our own patented product Taksopen TS3 here. If you need to treat roofs, facades, patios etc. with agents, we have collected some products here. If you need more brushes for the shaft and other accessories, you will find it here.
If you are looking for other packages for brushing (not liquid) high with a telescopic handle, e.g. for solar panels, you can find it here... Our popular snow plows for roofs can be found here.

If you want to use the same water-carrying handle for a Taksopen TS3 or Snow Plow SN3, you need this adapter and then choose TS3 and SN3 without handle. You have to keep in mind that you have to tie up the hose down by the handle so you do not trip on it. Also keep in mind that the hose makes the Taksopen / Snowplow about 800 grams heavier compared to if you would choose the tools with a handle, and without a hose, and then you put on a hose on the outside (plus brush) on the handle when you are going to e.g. wash the facade and then remove the hose when you are done. Telescopic handles with a hose inside should remain in the handle as it is difficult to get the hose back inside the pipes. It is not made to remove the hose inside the pipes.

Before starting work; Inspect the surfaces you are going to wash and where any obstacles are and locate and avoid power lines of course.

The hose is not intended for high pressure washing, max 10 bar.