Hängränneborste vinklad och MED teleskopskaft - 6
Cleaning the gutter is important and should be done at least once a year, preferably after sweeping and scraping the roof, before pine needles and leaves decompose in the gutter and turn into soil. To ensure that water drains from the roof as effectively as possible, it’s important to clean the gutters and the roof. You don’t want water to seep under the roof tiles and roofing felt, which can then cause water damage to the roof. We have tools and brushes that you attach to our telescoping handles and use to sweep the debris toward the downspout. Then wiggle the brush slightly to dislodge as much debris as possible over the edge of the gutter. Repeat until you feel the brush glide smoothly through the gutter. Most of the debris will flow down through the downspout. Tip: If there’s a blockage in the downspout, attach a long string to, for example, the brass adapter (54 gr) that comes with the telescopic handle. Then place the adapter in the center of the blue brush’s opening, lift the brass adapter and telescopic handle up to the downspout opening, and you can start “fishing” and “tapping” with the brass adapter inside the downspout. If that doesn’t work, use something that weighs a little more than the adapter’s 54 g and continue with the same movements. If the downspout isn’t too high up, you don’t need to use the shaft and brush to insert the adapter with the string. The brass adapter is just one example of a “lure.” If you have something else small that fits in the downspout and weighs 50 grams or more, use that.
If you need to remove moss from the roof, we offer our own patented Taksopen TS3. It’s an effective tool for scraping and sweeping moss off the roof. If you’d like to treat the roof afterward with an algae and moss remover, you’ll find solutions under this tab. There, you’ll find various options for applying the treatment to the roof while standing on the ground, if you prefer.