Snow rake/peeler WITHOUT telescopic pole (incl wheels and pvc cloth).

Shovel the roof quickly, easily and safely. NOTE: This variant is delivered without shaft. Includes PVC cloth and aluminum shaft bracket that fits shafts with cone-shaped german/euro thread.

If you are unsure what thread it is, go here for brass adapter, art.no 12130, NOTE. sold separately. The brass adapter has an inner diameter of about 20 mm.

Screw on a shaft, stand a little to the side, and place it at the bottom of the roof and push it upwards so that the snow slides down to the ground via the strong PVC cloth. The snow shovel weighs approximately 1.2 kg. Made in Sweden and design/design protected. High quality of the snow planer! See pictures on the right.

If you want to use our water-bearing handle for the snow planer, you need this adapter. You have to keep in mind that you have to tie up the hose down by the handle so you do not stumble on it. Also keep in mind that the hose makes the Taksopen / Snow planer about 800 grams heavier compared to if you would choose the tools with a handle, and without a hose, and then you put on a hose externally (plus e.g. facade brush, solar panel brush) on the handle when you are going to e.g. wash the facade and then remove the hose when you are done. Telescopic handles with a hose inside should remain in the handle as it is difficult to get the hose back inside the pipes. It is not designed to remove the hose inside the pipes.